Eagle Ford

Catalyst Artificial Lift – South Texas

Trying to perfect a sucker rod pump design in a South Texas horizontal well can sometimes be compared to pushing a chain. As hard as one may try, the laws of physics simply don’t make it easy to achieve sustained efficiency. However, by understanding what you are up against and taking necessary steps, a productive design can be attained.

Because we love efficiently pumping wells, let’s take a look at some commonly faced challenges so that you can be prepared for your next design. When operating a well with a sucker rod pump in the Eagle Ford you are bound to encounter issues caused by either particulates, gas (locking & interference), and bore deviation.

Horizontal wells have a tendency to accumulate particulates on the bottom side of the lateral well bore. This buildup can cause major problems by damaging softer pump components and gumming up the entire pumping process. This is one of the reasons that many designers choose to set their pump prior to the curve, effectively missing out on much of the intended pay zone. There are many other inefficiencies associated with this method, but that is a topic for another article.

Gas is another major contributor to down-hole woes. When free gas is introduced between the valves of a pump, gas lock can occur. This renders the pump useless while continuing to consume power at the pumping unit. Free gas does not always cause lock to occur but simply interferes with maintaining a constant fluid column in the pump, consequently robbing efficiency.

Whether intentional or unintentional, well bore deviation introduces yet another variable to be taken into account when optimizing a sucker rod pump design. Excess friction between rods, couplings, and tubing can create major problems in no time. Degree of deviation will ultimately dictate which methods are to be used, but issues can typically be addressed by adding a combination of rod guides and tubing anchors to problem areas.

As always, knowledge is power, so be sure to consult with local experts in your area of operation. They will have first-hand experience and understand the challenges that you are facing in your wells. An experienced sucker rod pump expert will be able to diagnose problems and provide valuable recommendations to ensure that your next design is as efficient and resilient as possible.

It is ultimately up to operators and engineers to strike the most efficient balance between mechanical optimization and operating costs. This is where Catalyst Artificial Lift can help. By providing operators and pump techs with the material and design options they need to tackle the toughest of well conditions, Catalyst Artificial Lift can help strike that balance.

Catalyst Artificial Lift – ArkLaTex – Kilgore, TX


The historic oil fields of East Texas, Southern Arkansas, and Western Louisiana have cumulatively produced more barrels of oil than any other region in the United States. This area, commonly referred to as the ArkLaTex, still boasts a massive number of operating wells, the vast majority of which are utilizing some means of artificial lift to bring crude to the surface. Of the various types of artificial lift, rod pump lifting is the most common method used in this area, and for good reason.

Traditionally, the rod pump method of lifting has been regarded as the simplest and most economical way to bring fluid into the production line. Unfortunately, today’s operators are faced with harsh down-hole conditions that have little regard for depressed market prices and increased operating costs. Corrosive pumping environments can wreak havoc on a rod pump’s components, effectively deteriorating production rates and efficiencies. When it comes to sourcing new and replacement down-hole pump components, many operators are forced to choose between high priced established brands and economy options while sacrificing quality and risking pre-mature failure.  Fortunately, Catalyst Artificial Lift offers neither of these.

Seating Assemblies

Catalyst Artificial Lift produces some of the finest down-hole rod pump components available to the market today. A regional distribution point in Kilgore, Texas, ensures that crucial components are readily available when valuable time is an issue. Catalyst stocks ample inventories of product specifically designed for mature, lower volume wells, such as cup type plungers and soft pack barrels. Additional material options are also available to combat the highly corrosive pumping environments sometimes found in the ArkLaTex region.

When a pump is built or repaired with Catalyst parts, operators can rest assured that they are getting a meticulously crafted component made from the highest quality raw materials available, at a fair price. If you would like to find out more about how Catalyst Artificial Lift components can help your bottom line, contact us on the web, or give us a call at (620) 365-7150. If you have an ArkLaTex related question please feel free to call us in Kilgore, TX at (903) 986-1923.


Catalyst Artificial Lift Showcased in South Texas

At this years South Texas Oilfield Expo in San Antonio, Catalyst Artificial Lift displayed a wide variety of quality down-hole pump parts available to the artificial lift market.

Catalyst products on display included barrels, cages, fittings, guides, plungers, and seating assemblies.

Passersby were able to see how the components all came together to form a subsurface artificial lift pump, thanks to the various “cut away” models on display.

Jim Jeffcoat, Catalyst’s VP of Sales and Marketing, was quoted as saying “It’s very exciting to see people’s reactions when they discover that a new, high quality alternative exists in the down-hole pump market.”

Catalyst Floor

New Catalyst Artificial Lift Website!

We are pleased to announce the launch of our NEW website! Here you will be able to find out more about who we are, where we are, what we do, and how we can help with your down-hole pump artificial lift needs.

Feel free to navigate around the site, and please contact us should you have any questions.

Be sure to check out our Products Page to see the wide variety of high quality artificial lift parts that we manufacture including:

  • Barrels
  • Cages
  • Mandrels
  • And More

Welcome to Catalyst Artificial Lift!